 | LVTE-2FT-15-25W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 15W/17W/20W/25W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 3500LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Col
| |  SPEC  MANU |
 | LVTE-4FT-20-35W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 20W/28W/35W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 4900LM Max.
- :: Multi-CCT & Power (Selectable Switch Inside Fixture)
- :: Color Te
| |  SPEC  MANU |
 | LVTE-4FT-30-46W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 30W/38W/46W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 6400LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Color
| |  SPEC  MANU |
 | LVTE-4FT-30-60W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 30W/45W/60W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 8400LM
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Color Temperat
| |  SPEC  MANU |
 | LVTE-8FT-45-65W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 45W/55W/65W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 9100LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Colo
| |  SPEC  MANU |
 | LVTE-8FT-55-90W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 55W/65W/75W/90W
- :: Power Factor: >0.9
- :: Efficacy: 150LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 13500LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
| |  SPEC  MANU |
 | LVTE-8FT-65-110W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 65W/75W/90W/110W
- :: Power Factor: >0.9
- :: Efficacy: 140LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 15400LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture):
| |  MANU  SPEC |
 | LVTE-4FT-100-135W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 100W/120W/135W
- :: Power Factor: >0.9
- :: Efficacy: 150LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Vandal-Proof Polycarbonate Lens
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 20250LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Color
| |  SPEC  MANU |
 | LVTE-4FT-100-155W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 100W/120W/135W/155W
- :: Power Factor: >0.9
- :: Efficacy 150LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Vandal-Proof Polycarbonate Lens
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 22500LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
| |  SPEC  MANU |
 | LVTE-4FT-150-200W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 150W/175W/200W
- :: Power Factor: >0.9
- :: Efficacy: 150LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 30000LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
| |  SPEC  MANU |
 | LVTE-4FT-200-245W-MCTP-EM-SEN | - :: Voltage: 120-277VAC 50/60Hz
- :: Wattage: 200W/230W/245W
- :: Power Factor: >0.9
- :: Efficacy: 150LM/W
- :: Grey Finish
- :: Housing: Polycarbonate
- :: Vandal-Proof Polycarbonate Lens
- :: 1/2” NPT knockout on both ends. Liquid Tight Cord Connectors Incl.
- :: Polycarbonate Construction Highly Impacts Resistant
- :: UV-Stabilized Polycarbonate Diffuser Eliminates Glare
- :: Diffuser Crystals Enhance Even Light Distribution
- :: Stainless Steel Clips Evenly Seal The Luminaire
- :: Stainless Steel Clamp
- :: Operating Temp:-25.6°F to 104°F
- :: Suitable For Wet Locations
- :: IP Rating: IP66
- :: Detection Range: 17Ft. / 360°
- :: Mounting Height: 25Ft. Max.
- :: DIP Settings switch on The Sensor
- :: Optional Remote Control (WEC-3RC)
- :: Output Power: 9W
- :: Output Voltage: 48V
- :: Li-Ion Battery / >90 Minutes Emergency Operation
- :: Test Button Installed on The Side of The Fixture
- :: Dimmable: 0~10V Dimming
- :: LED SMD Type: 2835
- :: Total Lumens: 36750LM Max.
- :: Multi-CCT & Power(Selectable Switch Inside Fixture)
- :: Color
| |  SPEC  MANU |